How to apply & remove Tints.

How do I apply Wild Tints? 
 

You will need the following: 

  • 2X Clean cloths, one wet and one dry  
  • Sharp scissors (Optional: Box cutter - use at your own risk!) 
  • Marker or pen
  • 2X Plastic card  

Steps: 

  1. Clean and dry window 
  2. Trace the outside of the window using marker on the paper side of tint 
  3. Cut around marked line, be sure to leave at least 2cm extra so you can position tint 
  4. Pull backing off and gently apply to inside of window starting with the centre and working outwards. If it is not centred, you can pull off and try again. (Your 2cm extra comes in handy here) 
  5. Use plastic card to smooth and scissors/box cutter to neatly trim edges.  

          Check out this like to our Instagram page for a brief instructional video. 

           

          How do I remove Wild Tints? 

          You will need the following: 

          • Sponge with soapy water 

          Steps: 

          1. Apply soapy water to the tint 
          2. Leave to soak for 10 minutes 
          3. Reapply soapy water mixture and pull tint off in one piece whilst wet.